Rayco RG 1635A User Manual

Copyright © 2000 Rayco - All Rights Reserved
Printed in U.S.A.
31
RAYCO
®
RG 1635A STUMP CUTTER
MAINTENANCE INTERVALS
Changing Teeth
WARNING
Lock the cutting boom in raised position when
changing teeth.
NOTICE
Read all of the following instructions before be-
ginning to change cutting wheel teeth.
1. Clean all dirt from the cutting wheel (1) and
teeth (2).
2. Remove the socket head bolts (3) from the
teeth (2). (The 1/2" hex key provided with the
machine may be used.)
3. Check the cutting wheel for cracks. Replace
the wheel if it is cracked.
NOTICE
The following three pages represent the exact
location required for positioning each tooth.
When followed exactly, optimum cutting wheel
performance is attained.
1
2
3

Rayco RG 1635A Specifications

General

Brand	Rayco
Model	RG 1635A
Category	Lawn and Garden Equipment
Language	English