Copyright © 2000 Rayco - All Rights Reserved
Printed in U.S.A.
55
RAYCO
®
RG 1635A STUMP CUTTER
TROUBLE-SHOOTING
Engine System
NOTICE
For trouble-shooting the engine system refer to the
Wisconsin [Engine] Operation Manual.
Trailer Wheels
NOTICE
For trouble-shooting the trailer wheels refer to the
Trailer Running Gear - Operation Maintenance
Service manual, which was provided with the
machine.
Electrical System
An electrical schematic, found in the •Parts•
section, may be used for reference when
troubleshooting the electrical system.
Symptom - Battery not getting
recharged
A. Problem - Blower V-belt is too loose or
broken
The alternator is integrated into the blower. Therefore,
the same V-belt drives both.
Solution
Check blower V-belt according to directions given in
the Wisconsin [Engine] Operation Manual. Re-tension
or renew as required.
To Next Page
Loading...
Need help?
General
