Copyright © 2000 Rayco - All Rights Reserved
Printed in U.S.A.
5
RAYCO
®
RG 1635A STUMP CUTTER
Foreword
About This Manual
This manual contains safety, operating, lubrication,
maintenance, troubleshooting, and parts information.
Read - study - keep it with the machine - adhere to all
of the recommendations.
NOTICE
Where the engine is concerned, this manual
makes frequent reference to the Wisconsin [En-
gine] Operation Manual, which was packed in
your operators kit. Keep it, therefore, with this
RG 1635A STUMP CUTTER Operation,
Maintenance, & Parts Manual so that it may be
readily used.
Where the trailer wheels are concerned, this
manual makes frequent reference to the Trailer
Running Gear - Operation Maintenance Service
manual, which was packed in your operators kit.
Keep it, therefore, with this RG 1635A STUMP
CUTTER Operation, Maintenance, & Parts Manual
so that it may be readily used.
Guards and covers may have been removed for
illustrative purposes. Some photographs or illustra-
tions in this publication show details or attachments
that may be different from your machine. Continuing
improvement and advancement of product design
may have caused changes to your machine which are
not included in this publication.
Whenever a question arises regarding your machine,
or this publication, please consult your RAYCO
®
dealer
or RAYCO
®
for the latest available information.
NOTICE
When the NOTICE heading appears in this publi-
cation, what follows is either a clarification or in-
formation that will assist you in avoiding damage
to the machine or property.
Safety
The 'Safety' section lists basic safety precautions. In
addition, this section identifies the text and locations of
warning labels used on the machine.
Read and understand the basic precautions listed in the
'Safety' section beforehand, and apply them always as
you operate, transport, perform maintenance, and repair
the product.
Operation
The 'Operation' section is a reference for the new
operator and a refresher for the experienced one. This
section includes a discussion of gauges, switches,
machine controls, how to operate the machine, and
towing information.
Photographs and illustrations assist the operator in
understanding correct procedures of checking, starting,
operating, and stopping the machine.
Operating techniques outlined in this publication are
basic. Skill and techniques develop as the operator
gains knowledge of the machine and its capabilities.
Maintenance
The 'Maintenance' section is a guide to equipment
care. A combination of step-by-step instructions and
helpful illustrations and photographs accompany main-
tenance items throughout this section.
Trouble-Shooting
Possible symptoms are listed with a description of
associated problems and solutions. A description of
how the hydraulic system works is given, as well as
diagrams of the hydraulic and electrical systems.
Knowledge of such can be indispensable in solving
problems.
Parts
Parts are readily found through illustrations with
accompanying RAYCO
®
part numbers. The machine
is broken down into basic categories to enable ease of
finding parts. A separate engine Operation and Repair
Manual is also provided for aid in the identification and
ordering of engine parts. Please consult your local
Wisconsin engine representative or local RAYCO
®
dealer for obtaining engine parts and service.
To Next Page
Loading...
Need help?
General
