Rayco RG13II - Table of Contents

52 pages

Save Page as PDF

To Next Page

To Previous Page

RG13II Operation • Maintenance • Parts

800.392.2686

Table of Contents

TABLE OF CONTENTS

Forward 4

Safety 8

Operation 22

Maintenance 26

Speciﬁcations 50

Warranty 51

Main Page

Introduction2
Table of Contents3
Maintenance4
Maintenance Intervals4
Safety4
Certified Engine Maintenance5
Machine Description5
Serial Numbers Location6
Breakdown of the Serial Number6
Identification Numbers7
Safety Warnings8
Important Safety Information8
General Hazard Information9
Personal Protective Equipment9
Clothing Protection9
Shoes9
Flying Debris10
Pressurized Air and Water10
Trapped Pressure10
Fluid Penetration10
Dispose of Waste Properly11
Crushing Prevention and Cutting Prevention11
Batteries12
Oils12
Burn Prevention12
Coolant12
Fire Prevention and Explosion Prevention13
Fire Extinguisher13
Fire Extinguisher Location13
Ether Starting Fluid14
Electrical Storm Injury Prevention14
While Operating the Machine14
Lines, Tubes and Hoses14
Before Starting Engine15
Visibility Information15
While Servicing and Performing Maintenance on the Machine15
Slope Operation16
Engine Starting16
Operation16
Before Operation16
Work Tool Options - Attachments17
Sound Level Information17
Vibration Data Information Concerning Hand/Arm Vibration Level17
Guidelines for Reducing Vibration Levels on Equipment17
Guards (Operator Protection)18
Safety Decals18
LOCK-Out / Tag-Out Guidelines18
Lock out Procedure18
Removal Procedure19
Tag out Procedure19
General Identification20
Forward20
- Getting to Know Your Machine20
- Before Operating the Machine21
- Starting the Engine21
Operation21
- While in Operation22
- Set Handle Bar Height22
- Removing Stumps23
- Cutting Wheel Precautions23
- Helpful Tips for Operating Machine23
- Once the Stump Is Completely Cut24
- Stump Removal Procedure24
- Cut Remaining Roots24
- Remove the Roots24
- Normal Shutdown Procedure25
- Removing the Machine from Storage25
- Emergency Shutdown Procedure25
Maintenance26
- Walk-Around Inspection29
- Fuel Tank - Fill29
- Fuel Tank and Strainer - Clean29
- Engine Oil Level - Check29
- Using Rayco Teeth30
- Cutting Wheel - Check30
- Lubricate the Fittings30
- Grease and Oil Buildup - Remove30
- Changing Teeth31
- Sharpening Teeth31
- Tooth Sharpening Guidelines32
- Engine Combustion Air Cleaner32
- Park Brake Adjustment - Check32
- Drive Belts33
- Idle Speed - Check33
- Valve Clearance - Check and Adjust33
- Tire Condition - Inspect33
- Main Assembly34
- 39017 Frame Assembly40
- Curtain Kit (5133-A)42
- Engine Assembly (5095-D)43
- Brake Assembly (1705-E)44
- Handle Bar Assembly (10831-E)45
- Decal Kit (26947)46
Specifications47
- Wire Harness 4002948
- General Outline51
- Unapproved Service Modification51
- Individual Components51
Warranty51

Rayco RG13II - Table of Contents

Table of Contents

Related product manuals