Rayco RG13II User Manual

RG13II Operation • Maintenance • Parts
800.392.2686
47
Specifications
GENERAL
Weight ........................................................................................................ 262 lbs. (119kg)
Length .........................................................................................................79.75” (202.6cm)
Height ...................................................................................................................50” (127cm)
Width ...................................................................................................................25” (63.5cm)
Frame .................................................................................................... 7 ga. hot-rolled steel
Control bar .....................................................................2” (5cm) rectangular steel tubing
Tires .................................................................................................... 4.10 x 6 (10.4 - 15cm)
Brake .................................................................. Disc type, lever mounted on control bar
ENGINE
Make ................................................................................................................................ Honda
Model ............................................................................................................................GX390
Type .................................................................................................. 4-cycle, overhead valve
# of cylinders ......................................................................................................................... 1
Bore ...................................................................................................................... 3.5” (8.8cm)
Stroke ................................................................................................................... 2.5” (6.4cm)
Displacement .............................................................................23.7 cubic inches (389cc)
Maximum no load rpm ................................................................................................... 3600
Gross power at 3,600 rpm .......................................................................... 13 hp (9.7kw)
Maximum rated torque ........................................... 19.5 ft.-lbs. @ 2500 rpm (26.5 Nm)
Cooling medium....................................................................................................................Air
Air cleaner .......................................................................................................... Dual element
Fuel consumption ..........................................0.4 gallon/hr. (1.5 liters/hr.) @ 2500 rpm
Fuel tank capacity .......................................................................... 1.72 gallons (6.5 liters)
CUTTER WHEEL
Wheel diameter .................................................................................................... 11” (28cm)
Wheel thickness ...............................................................................................3/8” (.95cm)
Bearings ...............................................(2) 1” (3 cm) pillow block with lip contact seals
Speed .........................................................................3,480 rpm (w/engine at 3,900 rpm)
Drive belts .......................................................................................2 section banded v-belt
Belt guard .............................................................Electrically welded steel fully enclosed
Cutter teeth ..............................................................................(8) RAYCO SUPERTEETH
Chip deflection ............................................................... Steel, fabric impregnated rubber
Clutch ...................................................................................................................... Centrifugal
Additional safety features ...................... Steel guard, operator presence engine shut
down, low oil pressure engine shut down
CUTTING RANGE
Below ground level ............................................................................................. 13” (33cm)
Above ground level ............................................................................................. 22” (56cm)
Stump diameter .................................................................................................No limitation
OPTIONS
• Replacement teeth.
WARRANTIES
• RAYCO® provides a two year warranty on main frame and control bar.
• Standard warranty on components (engine, battery, tires, etc.) furnished by the manufacturer.
CE SPECIFICATIONS
Operator Ear Sound Pressure (db A-ambient 57.6) dB (Low Idle) ...................... 73.2
dB (High Idle) ............................ 93.1
dB (High Idle Cutting) .............94.4
Operator Controls Vibration (meter/sec2) RMS (Low Idle) ....................................... 2.1
RMS (High Idle) ............................................. 19.9
RMS (High Idle Cutting) .............................. 38.5

Rayco RG13II Specifications

General

Brand	Rayco
Model	RG13II
Category	Grinder
Language	English