Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of Global Version 2000 W CW laser
Raycus User Guide | Installation
Ensure that there are no fiber bends in radius less than
30cm when the product is installed. Avoid excessive
twisting and tight bends during the robotic arm movements.
Tight bends will damage the laser delivery system.
Before the laser output cable is assembled, the lens and
the cutting head cavity must be clean and free of pollution.
Keep the protective cap properly, prevent it
from contamination; or the aperture will be contaminated
when capped.
To Next Page
Loading...
Need help?
General
