Need help?Do you have a question about the Raycus RFL-C300L and is the answer not in the manual?
General| Laser Type | Fiber Laser |
|---|---|
| Wavelength | 1064 nm |
| Max Output Power | 300 W |
| Average Power | 300 W |
| Peak Power | 10 kW |
| Beam Quality (M²) | <1.8 |
| Cooling Method | Water Cooling |
| Weight | <100 kg |
| Output Power Adjustable Range | 10-100% |
| Power Supply | Single-phase 220V AC, 50/60Hz |
| Dimensions | 970 x 570 x 300 mm |
| Operating Voltage | AC 220 V ±10%, 50/60 Hz |
Identifies safety warnings and hazard symbols used in the manual.
Classifies the laser according to safety standards and outlines potential risks.
Details the locations and types of safety identifiers on the laser device.
Provides safety precautions related to the laser's optical components.
Outlines essential safety measures for electrical connections and handling.
Details the technical specifications of the laser, including optical and electrical characteristics.
Guides on the size and proper installation of the laser's output optical cable.
Details the requirements and procedures for installing the cooling system.
Guides on physical installation and the correct startup sequence.
Explains how alarm information is displayed and updated.
Covers red light control and the proper procedure for shutting down the laser.
Explains how alarm states are shown on the software interface.
Lists common alarms and provides instructions for troubleshooting and resolution.
To Next Page
