Need help?Do you have a question about the Raycus RFL-C4000S and is the answer not in the manual?
General| Brand | Raycus |
|---|---|
| Model | RFL-C4000S |
| Category | Measuring Instruments |
| Language | English |
Explains warning and caution symbols used in the guide.
Details the Class 4 laser classification of the product and associated hazards.
Describes the location and purpose of safety labels on the laser unit.
Provides precautions regarding the laser output lens and potential damage.
Outlines essential electrical safety measures for operating the laser.
Lists general safety guidelines for operating the laser and handling the device.
Highlights the main features and applications of the Raycus CW fiber laser.
Explains the model naming convention and designation codes for the laser series.
Instructs users to check the packing list for included items.
Guides users on how to safely unpack and inspect the laser unit upon delivery.
Details the basic operating conditions, including voltage, capacity, and ambient requirements.
Lists critical precautions to prevent device damage and ensure safe operation.
Presents detailed technical specifications for the RFL-C4000S laser.
Shows the physical dimensions of the RFL-C4000S laser unit.
Describes the QBH/iQB output head and provides installation cautions.
Specifies the cooling capabilities, flow rates, pressure, and water temperature requirements.
Provides a step-by-step guide for installing the laser product.
Identifies and explains the functions of the controls and indicators on the front panel.
Details the connectors and ports located on the rear panel of the laser unit.
Outlines the requirements and procedure for connecting the AC power supply.
Defines the various interfaces and their pin assignments.
Explains the pin designations and functions of the 24-pin control interface.
Describes how to configure the TCP/IP interface for communication.
Provides a step-by-step guide for installing the laser product.
Outlines the procedure for safely starting the laser system after installation.
Explains the functionality and features of the client software for controlling the laser.
Details the main control interface of the clientware, including status and parameter settings.
Describes the interface for displaying real-time alarm information.
Explains how to select different operating modes within the clientware software.
Details how to enable and use the programming mode for waveform editing.
Guides users on setting up and editing laser waveforms using the clientware interface.
Defines the commands used for waveform editing and programming.
Explains the different control modes available for the laser system.
Explains the Remote (REM) control mode and its sub-modes.
Describes how to control the guide laser externally or via the clientware.
Shows wiring diagrams for internal control and modulation modes.
Provides the correct sequence for safely shutting down the laser.
Explains how alarm states are displayed on the clientware interface.
Lists instructions and solutions for various laser alarm conditions.
Outlines the general warranty terms and conditions for Raycus fiber laser products.
Specifies what is not covered under the product warranty.
Provides instructions for obtaining service and performing repairs on the laser product.
To Next Page
