EasyManuals Logo

Raycus RFL-C4000S User Manual

Raycus RFL-C4000S
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL- RFL-C4000S
5
These safety labels include warning labels, apertures through which laser radiation is emitted
and labels of certification and identification, etc. Specifications of these labels are as follows:
Table 1: Specifications of Safety Labels
(Take 500W for example)
1.Aperture Label
2.Class 4 Laser Product
3.Class 2M Laser Product
Label for Guide Laser
4. CE Compliance
5. Identification Plate
6.Laser Radiation Hazard
Label
7.Electrical Hazard
1.4 Optical Safety
Any dust on the end of the collimator assembly can burn the lens and damage the laser.
CAUTION: If the output of the device is delivered through a lens with
an anti-reflection coating, make sure that the lens is of good quality and
clean.
1.5 Electrical Safety
(1) Make sure your product is grounded through the PE line of the AC power cord. The
grounding must be firm and reliable.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Raycus RFL-C4000S and is the answer not in the manual?

Raycus RFL-C4000S Specifications

General IconGeneral
BrandRaycus
ModelRFL-C4000S
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals