Need help?Do you have a question about the Raycus RFL-C1000H and is the answer not in the manual?
General| Laser Type | Fiber Laser |
|---|---|
| Output Power/Average Power | 1000 W |
| Wavelength | 1060-1080 nm |
| Central Wavelength | 1070 nm |
| Cooling Method | Water Cooling |
| Weight | < 50 kg |
| Power Supply/Operating Voltage | AC 220V/380V ±10%, 50/60Hz |
| Operating Voltage | AC 220V/380V ±10%, 50/60Hz |
| Fiber Length | 10 m (Customizable) |
Defines warning and caution symbols used in the manual.
Classifies the laser as Class 4 and emphasizes the need for laser goggles.
Shows a diagram of laser safety identifier locations and lists their types.
Warns about dust on the collimator and protective cap removal.
Covers grounding and correct voltage usage.
Details rules like not looking at the connector, avoiding dark environments, and not opening the device.
Lists required operating conditions like voltage, temperature, and humidity.
Highlights crucial points like correct voltage and avoiding improper operation.
Specifies requirements for the cooling system and water quality.
Explains how laser alarms are displayed on the client software interface.
Details instructions and possible solutions for various alarm conditions.
To Next Page
