Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of Global Version 2000 W CW laser
Raycus User Guide | Using the Product
4.7.7 Main control module
The main control module contains all states, alarms and system parameters of
the main control module. The status and alarm information are automatically
refreshed. Only when the currently selected page is in the main control module, the
upper machine software will automatically read and refresh status and alarm
information. Reducing the frequency of communication and avoid too many
resources to occupy the main control module.
Figure 16 Main control module status information interface
4.7.8 Slave control module
Power surveillance contains the alarm of the ACDC module and DCDC
module. The monitoring enables the control, the failure level is high, the low level
is set, the level is high, low settings, and the CAN communication enables the
settings. ( The power supply schemes of different models are different, and the
opening level and fault level modes are different. Please refer to the actual model.
The following power supply monitoring module interface is only for display, not
for parameter guidance.)
To Next Page
Loading...
Need help?
General
