Need help?Do you have a question about the Raycus RFL-C3000S-CE and is the answer not in the manual?
General| Model | RFL-C3000S-CE |
|---|---|
| Type | Fiber Laser |
| Max Output Power | 3000W |
| Wavelength | 1070nm |
| Cooling Method | Water Cooling |
| Output Power Adjustability Range | 10%-100% |
| Fiber Length | 10m |
| Power Supply | AC 380V±10%, 50/60Hz |
Explains warning and caution symbols for safety.
Details the laser's Class 4 classification and associated risks.
Shows the location and types of safety labels on the product.
Covers precautions for protecting the eyes and equipment from laser light.
Outlines essential electrical safety measures for operation and grounding.
Lists general safety guidelines and prohibitions for using the laser.
Highlights the key advantages and capabilities of the fiber laser.
Explains the model naming conventions and technical specifications.
Lists items included in the product package for verification.
Provides instructions for safely unpacking and inspecting the laser unit.
Specifies the required environmental conditions for optimal laser operation.
Details critical precautions to prevent damage and ensure proper laser functionality.
Presents detailed technical specifications for optical and electrical characteristics.
Shows the physical dimensions of the laser unit with diagrams.
Guides on the installation and dimensions of the laser output head.
Specifies the necessary cooling capabilities and water quality for the laser.
Step-by-step instructions for safely installing the laser system.
Describes the indicators and controls on the front panel of the laser.
Details the connectors and ports located on the rear panel.
Instructs on connecting the laser to the appropriate AC power source.
Explains the various interfaces for controlling and communicating with the laser.
Provides steps for physical installation of the laser system.
Outlines the procedure for powering on and starting the laser system.
Explains client software features, modes, and control interfaces.
Discusses various methods and wiring for controlling laser operation.
Provides instructions for controlling the integrated guide laser.
Explains how to edit and set laser operating waveforms.
Specifies the frequency and duty cycle requirements for modulation signals.
Outlines the procedure for properly powering off the laser.
Guides on using the mobile app for laser control via Bluetooth.
Explains how alarm states are displayed on the host computer software.
Provides instructions and solutions for various laser alarm conditions.
Outlines the warranty terms and conditions for Raycus fiber lasers.
Specifies exclusions and limitations to the product warranty coverage.
Details procedures and guidelines for product service and repair.
To Next Page
