Need help?Do you have a question about the Raycus RFL-A500D and is the answer not in the manual?
General| Brand | Raycus |
|---|---|
| Model | RFL-A500D |
| Category | Measuring Instruments |
| Language | English |
Explains the meaning of warning symbols used in the guide for hazards.
Details the laser classification (Class 4) and associated risks.
Illustrates and explains various safety labels and their locations on the product.
Warns about dust on the collimator assembly damaging the lens and laser.
Emphasizes proper grounding and correct AC power source voltage.
Provides general safety guidelines for laser operation.
Lists the main features and applications of the fiber diode laser.
Explains the model designation codes for the laser series.
Refers to the packing list for included items.
Guides users on how to unpack and inspect the laser for transit damage.
Lists basic operation conditions and recommendations for the laser.
Details safety precautions related to grounding, voltage, laser output, and cleaning.
Presents optical and output cable parameters for different laser models.
Provides overall dimension drawings and product size information.
Shows diagrams of the output head and mentions installation.
Details cooling capability, flow, pressure, and chiller categories for the laser.
Guides users through the steps for installing the laser system.
Describes the components and functions of the laser's front panel.
Details the connectors and indicators on the laser's rear panel.
Provides instructions and precautions for connecting the laser to AC power.
Explains the pins and functions of the SERVICE security interface.
Details the modulation input signal, cable, and definition.
Defines the pins and functions of the DB25 control interface.
Describes the pin definitions for the RS-232 serial port.
Explains the two work patterns (CW, Pulse) and three control modes.
Outlines the basic steps for operating the laser.
Mentions software for control mode selection.
Shows the wiring diagram for external RS-232 control.
Details the procedure for operating the laser in External RS232 mode.
Illustrates the control sequence for CW pattern in External RS232 mode.
Shows the wiring diagram for external AD control mode.
Outlines the operation procedure for external AD mode.
Illustrates the control sequence diagram for AD mode.
Shows the wiring diagram for internal control mode.
Details the operation procedure for internal control mode.
Illustrates the control sequence diagram for CW Mod in internal control mode.
Explains the function and behavior of the pilot light.
Provides step-by-step instructions for safely shutting down the laser.
Describes how alarm states are displayed on the client software.
Lists common alarms and their corresponding instructions and solutions.
Explains temperature alarms and their troubleshooting steps.
Describes humidity alarms and how to resolve them.
Outlines Raycus's general warranty terms for its products.
Details what is not covered by the product warranty.
Provides guidelines for service, repair, and contacting Raycus.
To Next Page
