Raycus RFL-A500D - 2.5 Operation Environment

Wuxi Raycus Fiber Laser Technologies Co., Ltd.
User Guide of Raycus 500W～2000W laser
8
On unwrapping the box, Please check that packing lists and physical goods are the same. If
you have any questions, feel free to contact any of us at any time.
When taking the laser out of the box, Avoiding knock against and violent vibration on the
laser. When taking optical fiber and output head, In particular, It is not possible to bend, twist
and pull optical cable, At the same time should avoid output head suffering the blows and
vibrations.
 The fiber optic cable and output head is precise opticinstrument, any
vibration or impact to the output head, and twist orexcessive bend to
the cable will damage the instrument.
2.5 Operation Environment
The basic operation conditions are listed in the table below:
Table 3 Basic Operation Conditions for the Laser
Requirements
Parameters
Laser（W）
500
1000
1500
2000
Supply Capacity(kW)
1.3
2.5
3.8
5.5
Installation
without significant shake, shock and vibration
Ambient Temperature(℃)
10～40
Relative Humidity(%)
＜70
It is recommended to install the laser in an air-conditioned environment so that the laser can
operate under optimal conditions.

Do not expose this product to high humidity (
＞
70%).

Do not expose this product to high temperature (
＞
40%).
 Do not let this product work below the ambient dew point temperature.
受 控
武汉锐科