Wuhan Raycus Fiber Laser Technologies Co., Ltd
User Guide of Global Version 2000 W CW laser
Raycus User Guide | Using the Product
3) Close the air switch on the rear panel and wait for the laser to power on
and perform a self-test.
Note: When the working environment temperature and relative humidity are
within the dew point area (blue) in Table 4, for RFL-C100 to C3000 type lasers,
please improve the working environment of the laser to avoid damage to the laser
due to condensation.
4.7 Functions of the clientware
The clientware of the Global Version 2000 W CW laser is communicates
with the main control board through UDP when it is working. Through the
background program running in the software and the human-computer interaction
operation, the laser parameters are read and set and the control functions are
realized. The interface displayed by the software is divided according to functional
categories, including control, alarm, about, language selection, authorization,
working mode selection and other pages.
Figure 11 The clientware interface
To Next Page
Loading...
Need help?
General
