rayence 1417WCE - Detector Mode Selection and Setup

PART I. User & Installation Manual
48 1417WCE
3.1.2 Mode Selection
Mode Description
<Auto Trigger>
Automatically detects X-ray radiation without integration of the
generator and detector.
<Manual Trigger>
Detects X-ray radiation by sending and receiving sync signals through
the integration between generator and detector.
<Station Mode>
Communicates with the wireless AP, and the wireless AP
communicates with the PC through the LAN cable.
(Rayence does not provide wireless AP.)
<AP Mode>
Detector communicates with the PC without the wireless AP.
(PC must maintain wireless network card.)
<Wired Mode>
Communicates with the power supply, and the power supply
communicates with the PC through the LAN cable.