AxiomXLsupplementaryinformation
W
arning:Productinstallationandoperation
•Thisproductmustbeinstalledandoperatedinaccordancewiththeinstructionsprovided.
Failuretodosocouldresultinpersonalinjury
,damagetoyourvesseland/orpoorproduct
performance.
•RaymarinerecommendscertifiedinstallationbyaRaymarineapprovedinstaller.Acertified
installationqualifiesforenhancedproductwarrantybenefits.ContactyourRaymarinedealer
forfurtherdetails,andrefertotheseparatewarrantydocumentpackedwithyourproduct.
Technical accuracy
To the best of our knowledge, the information in this document was correct at the time it was produced. However,
Raymarine cannot accept liability for any inaccuracies or omissions it may contain. In addition, our policy of
continuous product improvement may change specifications without notice. As a result, Raymarine cannot accept
liability for any differences between the product and this document.
Cable suppression ferrites
To ensure optimum EMC performance and to comply with applicable EMC regulations any RayNet cables connected
to this product must have a suppression ferrite fitted.
Three suppression ferrites are included with your display, one for each RayNet connection.
Fit a ferrite to each RayNet cable as shown below:
To Next Page
Need help?
General
