Need help?Do you have a question about the Raymarine Autohelm ST 30 and is the answer not in the manual?
General| Brand | Raymarine |
|---|---|
| Model | Autohelm ST 30 |
| Category | Marine Equipment |
| Language | English |
Guidance on selecting an optimal location for the ST30 Depth instrument installation.
Step-by-step instructions for physically mounting the ST30 Depth instrument.
Details on connecting the ST30 Depth to a 12V power supply for standalone use.
Instructions for connecting the ST30 Depth to a SeaTalk system.
How to link multiple ST30 instruments together using daisy-chain cables.
Connecting the depth transducer cable to the ST30 Depth instrument.
Information on different types of transducers compatible with the ST30 Depth system.
Guidelines for installing the depth transducer, including orientation and placement.
Procedures for cleaning and maintaining the ST30 Depth instrument itself.
Referencing separate instructions for transducer maintenance.
Instructions for inspecting and maintaining the unit's cables.
Contact information for further advice or product support.
Explanation of how to use the 'Display' key to cycle through operational menus.
How to adjust the instrument's illumination level using the 'Light' key.
Details on setting and managing shallow and deep water alarms.
Procedure for entering the calibration mode on the ST30 Depth instrument.
How to select between feet and metres for depth display.
Configuration of shallow and deep water alarms, including setting alarm depths.
Setting the keel or waterline offset to display correct depth readings.
Enabling or disabling the calibration lock to prevent accidental changes.
Configuring the ST30 Depth to operate as a master or repeater unit.
To Next Page