What to do if my Raymarine AIS 350 Marine Equipment shows no data?
If your Raymarine Marine Equipment shows no data, verify that all connections are secure throughout the system and that the VHF antenna lead is securely connected. Also, check the NMEA and/or SeaTalkng output from the multifunction displays to the transceiver input, ensuring the wires are correctly connected and the baud rate for NMEA is 38400 baud.
Why is there no AIS data on my Raymarine Marine Equipment?
If you're not getting AIS data on your Raymarine Marine Equipment, check the NMEA and/or SeaTalkng output from the multifunction displays to the transceiver input. Make sure the wires are correctly connected and the baud rate for NMEA is set to 38400 baud.
How to troubleshoot a Raymarine AIS 350 with no power?
If your Raymarine Marine Equipment has no power, check all power connections and relevant fuses. Also, ensure that the power supply is at the correct voltage (12 V or 24 V).
Information applies to all geographical areas unless otherwise stated.
Raymarine recommends certified installation for enhanced product warranty benefits.
Safety notices regarding RF radiation, compass proximity, and water ingress.
Legal disclaimers, AIS service disclaimers, and EMC guidelines for installation.
Guidance on cleaning, warranty, regulatory compliance, and technical accuracy.
Details about the document and the products it covers.
Information on visual aids and the overall installation process outline.
Explanation of AIS technology and different AIS classes.
Details on communication protocols like SeaTalkng, NMEA2000, and NMEA0183.
Introduction to the AIS350 receiver unit.
Checklist and guidance for planning the AIS350 installation.
Guidance on cable types, routing, strain relief, and circuit isolation.
Site requirements and unit dimensions for fitting the AIS350.
Procedures for verifying correct operation and checking for interference.
Common issues and their solutions for the AIS350.
Lists NMEA 2000 PGNs and NMEA 0183 sentences supported by the AIS350.
Detailed technical data for the AIS350 receiver.
Introduction to the AIS650 Class B transceiver unit.
Information on programming vessel data like MMSI before use.
FCC and Industry Canada compliance and licensing requirements for the US and Canada.
MMSI requirements and country lists for operation outside North America.
Checklist and guidance for planning the AIS650 installation.
Guidance on cable types, routing, strain relief, and circuit isolation.
Site requirements and unit dimensions for fitting the AIS650.
Procedures for verifying correct operation and configuration status.
Explanation of the LED status indicator and product status meanings.
Common issues and their solutions for the AIS650.
Lists NMEA 2000 PGNs and NMEA 0183 sentences supported by the AIS650.
Detailed technical data for the AIS650 transceiver.
Information on how to contact Raymarine for support via web, phone, and email.
Catalog of SeaTalkng cables and accessories with part numbers.
List of available spare parts for the AIS receiver/transceiver.
General| Brand | Raymarine |
|---|---|
| Model | AIS 350 |
| Category | Marine Equipment |
| Language | English |
To Next Page