43
RealVision™3DSideVision™DownVision™
HighCHIRP/High
Frequency
MediumCHIRP/
MediumFrequency
LowCHIRP/Low
Frequency
SelectingaSonarchannel
ThefirsttimeyouopenanewSonarapppageyouwillberequested
toselectachannel,subsequentlyyoucanchangethesonarchannel
byselectingachanneliconfromtheSonarappmenu.
1.SelectarelevantchanneliconfromtheMenu.
2.Alternativelyselect
AllchannelsfromtheMenuandthenchoose
yourdesiredsonarmoduleandchannel.
PlacingaWaypointintheSonarapp
WhenyouobservesomethingofinterestintheSonarappyoucan
placeawaypointatitslocationsothatyoucanfindtheareaagain.
1.Selectandholdonthepointofinterestonscreen.
TheContextmenuisdisplayedandscrollingispaused,temporarily.
2.Select
AddWaypointfromthecontextmenu.
TheSonarimagewillremainpausedforapproximately10seconds
aftertheWaypointhasbeenplaced.
Note:ToplaceawaypointinaRealVision™3Dchannel,usethe
onscreenWaypoint/MOBiconortheappmenu:
Menu>Add
waypointtoplaceawaypointatyourvessel’scurrentlocation..