Need help?Do you have a question about the Raymarine AXIOM 2 PRO and is the answer not in the manual?
Critical warnings regarding installation, high voltage, power, and ignition source.
Cautions about product weight and the use of marine-grade sealants.
Information on regulatory compliance, e-Labels, and declarations.
Details on FCC and ISED RF exposure limits and compliance statements.
Legal disclaimers regarding product performance and electronic chart data.
Information on warranty registration, product disposal, and technical accuracy.
Details copyright information for the manual.
Lists the specific Axiom 2 Pro models this document applies to.
Explains formatting and terminology used throughout the manual.
Lists related documents and resources for the product.
Reference to the operation instructions for the LightHouse 4 software.
Describes the features and capabilities of the Axiom 2 Pro series.
Illustrates example basic and expanded system configurations.
Lists compatible transducers for RVM variants, categorized by connection type.
Lists compatible transducers for S variants, noting limitations.
Details the components included in the box for the 9 and 12-inch models.
Details the components included in the box for the 16-inch model.
Provides detailed dimensional specifications for the 9, 12, and 16-inch models.
Outlines key factors for selecting a mounting location, including ventilation and cabling.
Specifies optimal mounting locations for reliable GPS reception.
Discusses environmental factors affecting touchscreen performance.
Provides guidance for optimal wireless signal performance and placement.
Recommends testing display angles before final installation.
Offers recommendations for minimizing electromagnetic interference during installation.
Instructions for swapping the pilot control keypad with the user configurable keypad.
Overview of surface, flush, and bracket mounting methods for Axiom 2 Pro displays.
Step-by-step guide for trunnion mounting the 9 and 12-inch models.
Detailed instructions for preparing and trunnion mounting the 16-inch model.
Procedures for flush mounting the display, including surface preparation.
Steps for surface mounting the display, including gasket placement.
Best practices for cable types, routing, strain relief, isolation, and shielding.
Diagram and description of connectors on RVM variant displays.
Diagram and description of connectors on S variant displays.
General steps for connecting cables to the product.
Guidance on properly insulating and protecting bare wire connections.
Details on connecting the display to a 12V or 24V DC power supply.
Specifies fuse and breaker ratings for power protection.
Recommendations for connecting to distribution panels or batteries, and power cable usage.
Recommended method for connecting to a vessel's distribution panel.
Steps for connecting the power cable directly to the vessel's battery.
Advice on grounding the product and system requirements.
How to connect the display to NMEA 2000 or SeaTalkng networks.
Connecting the display for NMEA 0183 data using a converter.
Connecting the display to network devices via RayNet or RJ45.
Instructions for fitting suppression ferrites to RayNet cables for EMC compliance.
How to connect RealVision 3D and Max 3D transducers.
Connecting SideVision, DownVision, and CPT-S transducers.
Connecting CHIRP transducers to the 11-pin 1kW connector.
Connecting traditional transducers using an adapter cable.
How to connect CPT-S transducers to the S variant displays.
Connecting analog video sources to the display.
Connecting an external display via HDMI.
Connecting audio output to an amplifier or entertainment system.
Connecting external memory card readers or storage devices via the accessory port.
Connecting an external GPS antenna for improved reception.
General advice on product service, maintenance, and routine checks.
Procedures for cleaning the display case, screen, and sun cover.
Solutions for issues related to the display not turning on or restarting.
Diagnosing and resolving problems with GPS position fixing.
Troubleshooting common sonar display and performance issues.
Solutions for issues with Wi-Fi connectivity and network access.
Addressing problems with touchscreen responsiveness or functionality.
Solutions for erratic behavior, system crashes, or data corruption.
Information on how to contact Raymarine for support, warranty, and service.
Information on video tutorials and training resources for Raymarine products.
Technical details on the power requirements and consumption of the Axiom 2 Pro 9.
Operating and storage conditions, humidity, and water ingress protection.
Details on the display's size, type, resolution, and viewing angles.
Physical dimensions, weight, and storage capacity of the Axiom 2 Pro 9.
Performance details of the built-in GPS receiver.
Overview of all available input and output connections.
Sonar channel capabilities and ranges for RVM variants.
Sonar range for the S variant, specifically for 100 W Sonar.
List of standards and directives the product complies with.
Identifies the approval and compliance markings on the product.
Technical details on the power requirements and consumption of the Axiom 2 Pro 12.
Operating and storage conditions, humidity, and water ingress protection.
Details on the display's size, type, resolution, and viewing angles.
Physical dimensions, weight, and storage capacity of the Axiom 2 Pro 12.
Overview of all available input and output connections.
Performance details of the built-in GPS receiver.
Sonar channel capabilities and ranges for RVM variants.
Sonar range for the S variant, specifically for 100 W Sonar.
List of standards and directives the product complies with.
Identifies the approval and compliance markings on the product.
Technical details on the power requirements and consumption of the Axiom 2 Pro 16.
Operating and storage conditions, humidity, and water ingress protection.
Details on the display's size, type, resolution, and viewing angles.
Physical dimensions, weight, and storage capacity of the Axiom 2 Pro 16.
Overview of all available input and output connections.
Performance details of the built-in GPS receiver.
Sonar channel capabilities and ranges for RVM variants.
Sonar range for the S variant, specifically for 100 W Sonar.
List of standards and directives the product complies with.
Identifies the approval and compliance markings on the product.
Lists transducers compatible with the sonar module.
Lists available spare parts for Axiom 2 Pro displays.
Lists available accessories for Axiom 2 Pro displays.
Details extension and adapter cables for various transducer types.
Lists adaptor plates for installing Axiom Pro/2 Pro in place of legacy displays.
Lists various RayNet cables and connectors for network connections.
Lists adapter cables for connecting RayNet to RJ45 networks.
Lists cables, kits, and accessories for SeaTalkng networks.
To Next Page
General