Raymarine C-Series Reference Manual

154 C-Series Display Reference Manual
Selecting cell data
To select the data that is to appear in each cell:
1. Select the data group for the relevant panel e.g.
2. Select the data to be inserted in the highlighted panel:
Changing the size of the cells
You can change the size of the cells to meet your own particular requirements by using
the MERGE CELLS or SPLIT CELL function.
Splitting a cell
Use the SPLIT CELL function to create two smaller data cells:
1. Select the relevant cell within the required panel:
The direction in which the selected cell can be split is indicated on the soft key.
2. Split the highlighted cell:
D9106_1
Data Groups
Vessel
Navigation
Depth
Wind
Time and Date
Engine
Envir
o
nmen
t
Highlight data
group
Select data group
SELECT DATA...
SAILING
Press and hold
relevant soft key
e.g.
D8729_1
Data
Pressure
Air Temp
Set Drift
S
ea Tem
p
p
Numeric
Graph - 1 Second Interval
Graph - 1 Minute Interval
Graph - 5 Minute Interval
G
ra
p
h - 10 Second Interval
p
Highlight
required data
Select data
Select format
(if applicable)
OK
D9107_1
NAVIGATION
Press and hold
relevant soft key
e.g.
Active cell highlighted
Move highlight
to relevant cell
Heading
296
0
T
Speed
20.0kt
Trip
13.85nm
e.g.
Heading
296
0
T
Speed
20.0kt
Trip
13.85nm
e.g.
81221_4.book Page 154 Tuesday, February 28, 2006 5:24 PM

Raymarine C-Series Specifications

General

Brand	Raymarine
Model	C-Series
Category	GPS
Language	English