Raymarine C-Series Reference Manual

Chapter 1: Overview 3
Data (Chapter 7)
Course Deviation Indicator (Chapter 8)
You will need accurate heading and position data for your CDI application to be fully
functional.
Engine Monitor (Chapter 9)
T
Navtex (Chapter 10)
Major areas of NAVTEX coverage include the Mediterranean Sea, the North Sea,
coastal areas around Japan and areas around the North American continent.
You will need a Navtex receiver connected to your system via NMEA, in order to receive
this data.
D7376-1
View data generated by the system or by instruments
available on NMEA 0183, NMEA 2000 and SeaTalk or
SeaTalk
2
.
D7379-1
View real-time display of your vessel on a 'rolling
road' in 3D perspective.
Give details of any correction required to steer your
vessel along a given course.
View data about the distance and time to go until
you reach a specified point.
3nm North-Up Relative Motion Local
D7497-1
View engine data e.g. engine temperature, oil pressure,
fuel level etc from up to three engines on a compatible
engine system.
D8728-1
Automatic broadcast of localised Maritime Safety
Information (MSI)
Receive navigational and meteorological warnings, and
search and rescue information.
Draft
81221_4.book Page 3 Tuesday, February 28, 2006 5:24 PM

Raymarine C-Series Specifications

General

Brand	Raymarine
Model	C-Series
Category	GPS
Language	English