Raymarine C-Series Reference Manual

Chapter 4: Using the Chart 61
3. Continue entering waypoints. If you make an error, you can remove the last way-
point (see
page 62 for details).
4. Save your route when it is complete (see
page 63 for details).
... using existing waypoints
You can use waypoints that already exist, to build a new route.
1. Create your route:
Note: If you make an error, you can remove the last waypoint (see page 62 for details).
2. Save your route when it is complete (see page 63 for details).
Building a route using the waypoint list
You may prefer to build routes using existing waypoints in the waypoint list:
1. Select the Waypoint List route build option:
Sunday Trip#
GULLY RIDGE
Sunday Trip#
PORT POINT
Sunday Trip#
CREEK VIEW
CREEK POINT
PORTSIDE
Port point
Portside
D6546_2
RTE
SHOW/HIDE
ROUTES…
FOLLOW ROUTE
OPTIONS…
BUILD NEW
ROUTE
REVIEW AND EDIT
ROUTES…
4nm North-Up (Relative Motion) Local
D8351_1
Move cursor
over required
waypoint.
Includes waypoint in
route
ROUTES
BUILD NEW
ROUTE
USE THIS
WAYPOINT
Repeat as necessary
WPT
81221_4.book Page 61 Tuesday, February 28, 2006 5:24 PM

Raymarine C-Series Specifications

General

Brand	Raymarine
Model	C-Series
Category	GPS
Language	English