Need help?Do you have a question about the Raymarine C90w and is the answer not in the manual?
General| Display Size | 9 inches |
|---|---|
| Display Resolution | 800 x 480 pixels |
| Display Type | TFT LCD |
| Backlight | LED |
| Touchscreen | No |
| Chartplotter | Yes |
| Waterproof Rating | IPX6 |
| Fishfinder | Optional, external module required |
| Network | SeaTalkhs, NMEA 0183, SeaTalk |
| Cartography | Navionics |
| Power Supply | 12V DC |
| GPS | Yes |
| Weight | 5.3 lbs (2.4 kg) |
Covers critical safety warnings for product installation, operation, power, radar, and sonar.
Advises on chart card care, cleaning, sun covers, LCD display characteristics, and water ingress protection.
Details EMC installation requirements and guidelines for using CompactFlash cards with the display.
Provides information on conformity, product disposal, and warranty registration.
Specifies intended use (IMO/SOLAS) and technical accuracy disclaimers.
Lists available handbooks for installing the C-Series Widescreen range of multifunction displays.
Provides a step-by-step checklist for installing the display unit and associated system components.
Illustrates example system configurations for the C-Series display, showing connectivity to various devices.
Details the items included in the display unit's packaging for careful unpacking and verification.
Lists the necessary tools required for the installation process of the C-Series display unit.
Offers essential guidance on selecting, routing, and securing cables for optimal performance and longevity.
Details procedures and recommendations for making a secure and protected power connection to the display.
Explains connecting compatible displays and devices using the high-speed SeaTalkhs Ethernet-based marine network.
Describes connecting NMEA 0183 devices using the supplied power and data cable, outlining port capabilities.
Outlines connecting the display as part of a SeaTalkng network, including instruments and autopilots.
Details connecting NMEA 2000 devices via the SeaTalkng bus using appropriate adaptor cables.
Provides guidance on choosing an optimal location considering ventilation, mounting surface, cable entry, and interference.
Describes the standard flush or panel mounting arrangement, including steps and bolt selection.
Details mounting the display on an optional bracket accessory, including marking, drilling, and securing.
Explains the process of attaching and removing the front bezel after the unit has been mounted.
Guides through the initial power-on procedure, including selecting a page set and acknowledging warnings.
Explains how to verify GPS operation and check for a fix using the chart application, noting status icon meanings.
Details checking radar operation, including scanner initialization, transmission, and bearing alignment adjustment.
Guides on selecting the fishfinder transducer and checking sonar operation by observing depth readings.
Describes navigating the setup menu to select the desired operating language for the display.
Provides an overview and addresses power-up problems, listing causes and solutions.
Lists causes and solutions for radar issues (No Data) and GPS problems (No Fix, alignment).
Covers sonar issues (no data, DSM faults) and system data connectivity problems.
Explains SeaTalkhs LED indications and solutions for miscellaneous display problems like erratic behavior.
Provides web and telephone contact details for Raymarine technical support and information needed for service requests.
Lists websites for Sirius marine weather and audio services.
Provides the website for Navionics support related to chart data.
Details C-Series display specs: voltage, current, environmental, weight, screen, and data connections.
Provides GPS receiver specs and information on embedded cartography and conformance standards.
Lists available SeaTalk and SeaTalkng cables and accessories for compatible products.
Lists SeaTalkhs accessories, including digital radar scanner cables and extension cables.
Provides lists of optional accessories, spare parts, and service spares for the C-Series Widescreen displays.
Details the pinout configuration for the 19-pin twist-lock power, data, and video connector.
Lists the colors and specifications of cores used in the power, data, and video cables.
Describes SeaTalkng/SeaTalkhs connector types and network characteristics.
Lists NMEA 0183 sentences supported for transmission and reception by the C-Series display.
Lists NMEA 2000 PGNs supported for transmission and reception by the C-Series display.
To Next Page
