Raymarine c97 User Manual

typeoptionsareprovidedforguidanceonly.You
maywishtoexperimentwiththedifferentvesselhull
typeoptions,asitmightbepossibletoimprovethe
steeringperformanceofyourvesselbyselectinga
differentvesseltype.
Whenchoosingasuitablevesseltype,theemphasis
shouldbeonsafeanddependablesteering
response.
Important:Ifyouchangethevesseltypeafter
completingtheDocksidewizard,allcommissioning
settingswillberesettodefaultsettings,andyou
willneedtocompletetheDocksidewizardagain.
Selectingavesselhulltype
TheVesselhulltypecanbeaccessedfromthePilot
Set-uppage.
1.SelectPilotSettings.
2.SelectVesselSettings.
3.SelectVesselHullType.
4.Selecttheoptionthatmostcloselymatchesyour
vesseltype.
Thenewselectionisapplied.
PerformingtheDocksidewizard
Thedocksidewizardmustbecompletedbeforethe
Evolutionautopilotsystemcanbeusedfortherst
time.TheDocksidewizardguidesyouthroughthe
stepsrequiredforcommissioning.
TheDocksidewizardcontainsdifferentsteps
dependingonwhetheryouhavearudderreference
transducerttedtoyourvessel:
ThefollowingDockside
wizardproceduresonlyapply
tovesselswithoutarudder
referencetransducer:
•DriveTypeselection.
•RudderLimitsetting.
•Hard-overtimesetting
(Raymarinerecommends
thatthisinformation
isspeciedoncethe
docksidewizardand
RudderDrivecheckis
complete,usingtheHard
OverTimemenuoption).
•RudderDrivecheck.
ThefollowingDockside
wizardproceduresonlyapply
tovesselswitharudder
referencetransducer:
•DriveTypeselection.
•AlignRudder(rudder
alignment).
•RudderLimitsetting.
•RudderDrivecheck.
Toaccessthewizard,ensurethepilotisinstandby
modeandthenfromthePilotSet-uppage:
1.SelectPilotSettings.
2.SelectCommissioning.
3.SelectDocksideWizard.
Selectingadrivetype
Drivetypeselectionisavailablefromthedockside
wizard,andalsofromtheVesselsettingsmenu:
PilotSet-up>PilotSettings>VesselType>Drive
type.
WiththeDriveTypemenudisplayed:
1.Selectyourdrivetypefromthelist.
Note:Thedrivetypesavailablearedependant
ontheACUtype.Ifyourdrivetypeisnotlisted
contactyourRaymarinedealerforadvice.
2.SelectOKtosaveyoursettinganddisplaythe
nextset-uppage.
Note:YoucancanceltheDocksidewizardatany
timebyselectingSTANDBY.
Checkingtherudderalignment
Thisprocedureestablishesportandstarboard
rudderlimitsforsystemsusingarudderreference
transducer.
Theruddercheckformspartofthedocksidewizard.
Thefollowingprocedureonly
appliestovesselswitha
rudderreferencetransducer.
1.CentertherudderandselectOK.
2.Whenprompted,turntherudderhardtoportand
selectOK.
3.Whenprompted,turntherudderhardtostarboard
andselectOK.
4.Whenprompted,turntherudderbacktocentre
andselectOK.
Note:YoucancancelDocksidewizardatanytime
byselectingSTANDBY.
Rudderlimitsetting
AspartoftheDocksidewizard,thesystemwill
set-uptherudderlimits.
•Forvesselswitharudderreferencetransducer
—Thisprocedureestablishestherudderlimit.
Therudderlimitwillbedisplayedwithamessage
conrmingthattherudderlimithasbeenupdated.
Thisvaluecanbechangedifrequired.
•Forvesselswithoutarudderreference
transducer—Adefaultof30degreesis
displayed,andcanbechangedasrequired.
Hardovertime
Thehardovertimesettingcanbespeciedaspart
oftheDocksidewizard.
Thefollowinginformationonly
appliestovesselswithouta
rudderreferencetransducer.
Autopilotcontrol
171

Raymarine c97 Specifications

General

Brand	Raymarine
Model	c97
Category	Marine GPS System
Language	English