Raymarine c97 - Camera Cycling

18.5Cameracycling
WhenmultiplefeedsareavailabletheCamera
applicationcanbesetuptoautomaticallycycle
throughtheavailablefeedsataspeciedtime
interval.
Note:Cameracyclingisnotavailablewhen
theCameraapplicationisviewedaspartofa
splitscreenpage.
WithcameracyclingturnedontheCamera
applicationwillcyclethroughthedisplay’savailable
videoinput(s)andanyavailablenetworkedIP
camerafeeds.Thefeedswillbecycledintheorder
theyappearintheCameraselectionmenu:Menu
>CameraView>Camera:.Directvideoinput
feedswillappearrstfollowedbyanynetworkedIP
camerafeeds.Whenthenalfeedinthelisthas
beendisplayedtheCameraapplicationwillloop
backtotherstfeedinthelist.
Cameracyclingwillcyclethroughthemultifunction
display’savailablevideoinput(s)evenifnofeedis
connectedtotheinput(s).Whennofeedispresent
onavideoinputthe‘Novideosourceavailable’
messageisdisplayed.Youcanchoosewhetheror
notthevideoinput(s)appearduringcameracycling.
Thetimeintervalthateachfeedisdisplayed,before
switchingtothenextfeedcanbeadjusted.
Enablingcameracycling
Cameracyclingcanbeenabledindependentlyin
bothSingleViewandQuadView.
Fromthecameraapplication:
1.SelectMenu.
2.SelectCameraView.
3.SelectCameraCycling.
4.SelectCameraCycling:sothatOnis
highlighted.
SelectingCameraCyclingwillswitchcyclingOn
andOff.
Whenthemenuisclosedthecameraapplicationwill
cyclethroughallavailablefeedsatthedenedtime
interval.
Settingthetimeintervalforcameracycling
Thetimeintervalthateachvideofeedisdisplayed
forcanbeadjusted.Thetimeintervalspeciedwill
applytoCameracyclinginSingleViewandQuad
View.
FromtheCameraapplication,withCameracycling
turnedon:
1.SelectMenu.
2.SelectCameraView.
3.SelectCameraCycling.
4.SelectCycleInterval:.
Thecycleintervaladjustmentcontrolisdisplayed.
5.Adjustthesettingtotherequiredtimeinterval.
Duringcameracyclingeachfeedisdisplayedforthe
speciedtimebeforechangingtothenextfeed.
Showingorhidingvideoinputfeedsduring
cameracycling
Bydefaultyourmultifunctiondisplay’svideoinput(s)
areshownduringcycling,evenifnofeedis
connected.YoucanchoosetoIncludeorExclude
videoinput(s)fromCameracycling.TheInput(s)
includedorexcludedwillapplytobothSingleView
andQuadView.
FromtheCameraapplication:
1.SelectMenu.
2.SelectCameraView.
3.SelectCameraCycling.
4.SelecttheInclude<CameraName>:optionfor
thevideoinputyouwanttoShoworHide.
SelectingInclude<CameraName>:optionwill
switchbetweenshowingorhidingthevideoinput
duringcameracycling.
Note:Inthestepsabove<CameraName>
representsthedefaultfeednameprovidedbythe
connecteddeviceorthecustomnamewhichcan
beassignedtothefeed.
Turningoffcameracycling
YoucanturnoffCameracyclingusingthemethods
detailedbelow.
Fromthecameraapplication,withcameracycling
turnedon:
1.SelectMenu>CameraView>CameraCycling
>CameraCycling:sothatOffishighlighted,or
2.Changethecamera/videofeedmanually.
Cameraapplication
277