Chapter 2: System Integration 19
Connecting your E-Series display to a SeaTalk2 Keyboard
Notes: (1)
This configuration is suitable for existing SeaTalk/SeaTalk2 systems with ST290
DPU with cables lengths between the Display a and keyboard of less than 4.5 m
(2)
Do not connect the ST290 to the E-Series SeaTalk2 connection.
Key
SeaTalk
2
Keyboard
Junction box
E Series display
Terminator
Terminator
SeaTalk
2
cable
ST290 DPU
Existing
SeaTalk 2 system
Existing
SeaTalk system
SeaTalk
2
cable
SeaTalk cable
SeaTalk cable
SeaTalk cable
Power
12v supply
SeaTalk
2
Power/RF
ground cable
5A circuit
breaker or
Switch with
5A fuse
Not supplied/accessory/
existing system
Supplied in the box
To:
Existing SeaTalk
system
(for example: GPS and
Autopilot)
To:
Existing SeaTalk
2
system
(incorporating terminators,
power/RF ground)
D9013-1
grey
red
black
Note:
For multiple keyboard
installations, please refer to
your local dealer or to
www.raymarine.com
To Next Page
Loading...
