Raymarine E70085 Dragonfly - Cable Routing

Thetransducerpositionwillbeadjustedfurtherduringtesting
(seeTestingthetransducer).
D12 63 9-1
12.Tightenthetransducerpivotbolt.
13.Tightenthekick-upadjustmentscrewtoachievethedesired
kick-upforce.
Thekick-upforceneedstobeadequatetopreventthe
transducerfromkicking-upduringtestingbutalsoneedsto
belooseenoughsothatitcankick-upshouldthetransducer
bestruckbyanobjectwhenunderway.
Note:Thethirdlockingscrewisnotuseduntilthetransducer
hasbeensuccessfullytested.
Caution:Transducercable
•DoNOTcut,shorten,orsplicethetransducer
cable.
•DoNOTremovetheconnector.
Ifthecableiscut,itcannotberepaired.Cuttingthe
cablewillalsovoidthewarranty.
4.3Cablerouting
Thecablemustberoutedtothedesiredlocationofthedisplay.
Thecablecanberoutedthroughoroverthetransom.
Note:ThecablemustberoutedasfarawayfromVHFradio
antennacablesaspossibletoavoidinterference.
Thefollowingcableroutingrequirementsapply:
•Checkthatthecableislongenoughtoreachthelocationthe
displaywillbemounted.Anoptional4m(13.1ft)extension
cableisavailableifrequired.
•Ensurethereisenoughslackinthetransducercable,atthe
transducerend,toallowthetransducertopivotupanddown.
•Securethecableatregularintervalsusingcableclips
provided.
•Fillalltransommountingholeswithmarinegradesealantprior
totighteningsecuringscrews.
•Fillthetransomcableholewithmarinegradesealantafter
routingthecable(ifroutingthroughthetransom).
•Usetheescutcheonprovidedtocoveroverthetransomcable
hole(ifroutingthroughthetransom).
•Anyexcesscablecanbecoiledupataconvenientlocation.
22
Dragony