Raymarine E70085 Dragonfly - Deep Water; Chart Objects

8.8DeepWater
Waterdepthcanberepresentedusingblueshadingwithwhite
usedtorepresentdeepwater.
Thedepthatwhichwatercolorturnsfromblueshadingtowhite
canbechangedtosuituserrequirements.
Example1—Deepwaterfrom:66ft
Example2—Deepwaterfrom:7ft
Thedeepwaterfeaturecanalsobeturnedoffsothatallwater
appearsaswhite.
Note:TheDeepWaterfunctionisrestrictedtothedepthdata
availableonyourchartcard.
ChangingtheDeepWaterFromsetting
Youcanchoosethedepththatwaterchangescolortowhite.
FromtheChartapplicationmenu:
1.SelectChartSettings.
2.SelectDeepWaterFrom:.
3.Selecttherelevantdepth,orselectOff.
SelectingOffwilldisplayallwateraswhiteregardlessofdepth.
8.9Chartobjects
Youcandisplayadditionalinformationonthechartfor
cartographicobjects,ports,andmarinas.
Dependingonthechartcardyouareusing,youcanviewsome
orallofthefollowingadditionalinformation:
•Detailsofeachcartographicobjectthatismarkedonthe
chart,includingsourcedataforstructures,lines,opensea
areas,andsoon.
•Detailsofports,portfeatures,andbusinessservices.
•Pilotbookinformation(similartowhatyouwouldseeina
marinealmanac).Pilotbookinformationisavailableatcertain
ports.
•Panoramicphotosofportsandmarinas.Theavailabilityof
photosisindicatedbyacamerasymbolonthechartdisplay.
Thisinformationcanbeaccessedusingthechartcontextmenu
options.
Note:Theamountofobjectinformationavailabledepends
upontheelectronicchartsthatyouareusingforyoursystem.
Forfulldetailsofthefeaturesavailableforyourchartcards
contactyourchartcardsupplier.
Displayingpilotbookinformation
Fromthechartapplication,whenaportsymbolisdisplayedfor
aportwhichhasapilotbook:
1.Selecttheportsymbol.
Thechartcontextmenuwillbedisplayed.
2.SelectPilotBook.
3.Selecttherelevantchapter.
Displayingpanoramicphotos
Fromthechartapplication,whenacamerasymbolisdisplayed,
indicatingtheavailabilityofaphoto:
1.Selectthecamerasymbol.
Thechartcontextmenuisdisplayed.
2.SelectPhoto.
Thephotoisdisplayedonscreen.
Note:Notallcartographytypesarecapableofdisplaying
panoramicphotos.
Displayingchartobjectinformation
Fromthechartapplication:
1.Selectanobject.
Thechartcontextmenuisdisplayed.
2.SelectChartObjectstoviewdetailedinformationaboutthe
selectedobject
TheObjectInfodialogisdisplayed.
3.Selectingthepositionintheobjectinfodialogwillclosethe
informationdialogandpositionthecursorovertheobject.
4.Selectingavailableoptionswilldisplaydetailedinformation
aboutthatitem.
50
Dragony