12 Ray54E VHF Radio
9. CALL/MENU
Press and release this key to select to enter DSC Call Mode, which is used for
making DSC Calls and viewing the DSC Call Logs and the DSC Call
Phonebook.
A Maritime Mobile Service Identity (MMSI) number is required to operate
the DSC equipment in this radio. This number directs DSC calls directly to
your radio, much like a telephone number. You can program the MMSI
number yourself one time only using the Menu Operation described in
Section 6.8, DSC Setup. Otherwise, your Raymarine dealer can program or
change the number for you.
If the MMSI number has not yet programmed, the message DSC IS NOT
OPERATIONAL...PLEASE ENTER MMSI ID is displayed in the dot matrix display
when you press and release CALL/MENU.
DSC Call menu structure is outlined in the following drawing. Full details on
DSC call operation are described in Chapter 5:
To Next Page
Loading...
