Raymarine Ray55E - Transmitting and Menu;DSC Operations

Chapter 3: General Operations 39
Reprograming the Secondary Priority (PLUS) Channel
1. Press and hold the 16/PLUS key for 3 seconds to switch to the current
Secondary Priority (PLUS) Channel.
2. Press and hold the
16/PLUS key for 3 seconds again to switch to Reprogram
mode. The message CHG 2ND PRI? appears with YES highlighted.
3. Press SELECT soft key to accept. The confirmation message CHANGE 2ND
PRIORITY CH appears.
4. Rotate the
CH/OK knob until the desired new secondary channel is shown.
5. Press the OK soft key to accept the new Secondary Priority (PLUS) selection.
3.11 Transmitting
Press and hold the Push-to-Talk (PTT) key on the microphone to transmit on the
selected channel, and then release to receive. The TX indicator appears during
transmission.
Note: International regulations and good communications practice dictate that you not
interfere with other communications. Before transmitting, listen to make sure the channel
is clear.
D9356-1
09
SHIP/SHIP
B
A
I
N
T
A
50 46.1718N
001 17.7189W
AM10:33LOC
CH72
CH77
CH73
13
BRIDGE
B
A
I
N
T
A
CANCEL
OK
CH69
CHANGE 2ND
PRIORITY CH
LEFT: 78A
PRESS OK
TO ACCEPT
09
SHIP/SHIP
B
A
I
N
T
A
SELECT
CHG 2ND PRI?
YES
NO
13
BRIDGE
B
A
I
N
T
A
LEFT: 78A
CH06 CH72CH09
10
15
20
25
30
35
40
45
50
55
60
5
10
15
20
25
30
35
40
45
50
55
60
5
2ND PRIORITY
A
50 46.1718N
001 17.7189W
AM10:34LOC
2ND PRIORITY