Raymarine RAY60 - Installation Checklist and Parts

(whichmaybegrounded).Aprotectivebootissupplied
thatcanbeusedtoensureisolationoftheantenna
connection.
1
3
2
4
5
6
D13235-1
1.Disconnectyourantennacablefromtheconnector.
2.Pushtheantennacablethroughthesupplied
protectiveboot.
3.Re-connecttheantennacabletotheconnector.
4.Plugtheantennaconnectorintotheproduct’s
antennaconnectionandsecurebytighteningthe
lockingcollar.
5.Pushtheprotectivebootovertheconnection.
6.Securetheprotectivebootusingthesuppliedcable
ties.
Iftheantennaconnectorcannotberemovedthen
anothersuitablemeansofprotectionmustbeused,
suchaselectricaltape.
Controlsandinterface
Thecontrolsandinterfaceavailableareasfollows:
Basestation
D13220-1
5 6 7 8
1
3
2
4
1.Built-inspeaker
2.Rotaryknob/OKpushbutton—Pressknobin
toaccessmenu/DSCfunctionsandtoconrm
selections.Turnrotaryclockwiseoranti-clockwise
tomoveupanddownthroughmenuitemsorto
changechannelfromtheHomescreen.
3.LCD
4.VOL/SQ—Turnknobtoadjustvolumeorsquelch
upanddown.Presscenterbuttontoswitch
betweenvolumeandsquelchcontrol.
5.DISTRESS—Pushupthespringloadedcoverand
pressthisbuttontomakeaDSCdistresscall.
6.16/PLUS—Whenpoweredonpresstoswitch
betweenprioritychannels.
7.Power—Presstopowertheuniton.Pressand
holdfor3secondstopowertheunitoff.Momentary
presstoaccesstheshortcutlist.
8.Back—Movebackthroughmenuoptions.
Fistmic
D13221-1
2
1
6
4
3
5
1.PTT(PushtoTalk)—Pressandholdtosenda
voicemessage.Releasetoreturntoreceivemode.
Note:Themaximumtransmittimeislimited
to5minutestopreventun-intentional
transmissionsfromoccupyingtheVHF
channel.
2.Speaker
3.Microphonelocation
4.ChannelUpandDown—Changesthechannel
upordown.
5.HI/LO—PresstoswitchbetweenHigh(25W)and
low(1W)transmitpower.
6.16/PLUS—Whenpoweredonpresstoswitch
betweenprioritychannels.
Poweringtheuniton
Withtheradioconnectedtoapowersupplythepower
buttonisusedtoswitchtheradioonandoff.
1.PressthePowerbuttontopower-uptheradio.
Thestartupisdisplayed.
Ray60
Software V1.00
MMSI: 123456789
OK
Thestartupscreenwillautomaticallytime-outafter
5seconds.
2.PresstheOKbutton,orwaitforthestartupscreen
totime-out.
16
Ray52/Ray50/Ray60/Ray70