Raymarine RAY60 - Mounting Options; Product Dimensions

Ventilationrequirements
Toprovideadequateairow:
•Ensurethatequipmentismountedinacompartment
ofsuitablesize.
•Ensurethatventilationholesarenotobstructed.
•Ensureadequateseparationofequipment.
Mountingsurfacerequirements
Ensureunitsareadequatelysupportedonasecure
surface.DoNOTmountunitsorcutholesinplaces
whichmaydamagethestructureofthevessel.
Cableroutingrequirements
Ensuretheunitismountedinalocationwhichallows
properroutingandconnectionofcables:
•Minimumcablebendradiusof100mm(3.94in)is
requiredunlessotherwisestated.
•Usecablesupportstopreventstressonconnectors.
Warning:Protectunused
cables
Unusedcablesandwiresshouldbe
protectedfromwateringressandfrom
makingcontactwithmetalthatmaybe
grounded.
•Ifsupplied,useprotectivebootstoensure
thatcablesthatarenotconnectedare
protected.
•NEVERleavebareendedwires
uncovered/unprotectedasthiscould
causeashortcircuitandcaninduce
galvaniccorrosion.
Electricalinterference
Selectalocationthatisfarenoughawayfrom
devicesthatmaycauseinterference,suchasmotors,
generatorsandradiotransmitters/receivers.
Powersupply
Selectalocationthatisascloseaspossibletothe
vessel’sDCpowersupply.Thiswillhelptokeepcable
runstoaminimum.
Mountingoptions
Theproductcanbemountedinthefollowing
congurations.
D13203-1
1 2
3 4
1.T abletopmount
2.Overheadmount
3.Bulkheadmount
4.Panelmount
Productdimensions
Ray50/Ray52productdimensions
TheRay50/Ray52canbepanelmountedorbracket
mounted.
Ray50/Ray52dimensions(panelmount)
168 mm (6.6 in.)
156 mm (6.1 in.)
88.5 mm (3.5 in.)
134 mm (5.3 in.)
59 mm (2.3 in.)
143.6 mm (5.7 in.)
39.75 mm (1.6 in.)
21.5 mm (0.85 in.)
25 mm (1 in.)
D13168-1
Ray50/Ray52dimensions(bracketmount)
192.5 mm (7.6 in.)
121 mm (4.8 in.)
173.75 mm (6.8 in.)
25 mm (1 in.)
D13169-1
9