Raymarine RAY60 - Initial Startup; Accessing the Menu

6.6Initialstartup
Unlessyourradiohasbeenpre-programmed;
thersttimeyoupower-upyourradioyouwill
berequestedtoselectcertainoptions.Withthe
exceptionofyourMMSIandATISID,youwillalsobe
requestedtoentertheseoptionsafterafactoryreset.
Afteracknowledgingthestartupscreen,unless
previouslysetyouwillbepromptedtomakethe
followingselections:
1.Languageselection
See6.8Selectingalanguageforavailable
languages.
2.TurnonAISreception—Ray70only
Enablesthebuilt-inAISreceiver.Thisstep
isonlyapplicabletoradioswithabuilt-inAIS
receiver.See6.9SwitchingontheAISreceiver
formoreinformation.
3.Selectnetworktype
SelectswhichconnectiontotransmitAISand
DSCinformationtoconnectedequipmenton.
ThisstepisonlyapplicableiftheAISreceiver
wasturnedoninthepreviousstep.See6.10
Selectinganetworktypeforavailableoptions.
4.EnterMMSInumber
RequiredtoenableDSCfunctions.Thisoption
isnotrequiredafterafactoryreset,orifthe
radiohasbeenpre-programedinMARCOM-C
mode,orhasATISenabled.See6.11Entering
anMMSInumberformoreinformation.Ifnot
alreadyselectedyouwillalsobepromptedto
selectyournetworktype.
5.EnterATISID
Requiredwhentheradiowillbeusedinthe
inlandwaterwaysofEurope.Thisstepisonly
applicableiftheradiohasbeenpre-programed
inMARCOM-Cmode.See6.13Enteringan
ATISIDformoreinformation.
6.Frequencybandselection
Setstherelevantchannelsforyourregion.This
stepisnotapplicableiftheradiohasbeen
pre-programedinMARCOM-Cmode.See6.14
Changingtheradioregionformoreinformation.
6.7Accessingthemenu
Theradio’svariousoptionsandsettingsare
containedwithinthemenu.
D13228-1
FromtheHomescreen.
1.PresstheRotaryknob’sOKpushbutton.
48
Ray50/Ray60/Ray70