Raymarine RAY70 - Fistmic; Handset Mounting; Ray60; Ray70 Raymic Handset Cradle Mounting

5.4Fistmic/Handsetmounting
TheFistmicandoptionalHandsetcanbemounted
byfollowingthestepsbelow.WhilstonlytheFistmic
ispicturedbelowthestepsareidenticalwhen
mountingtheHandsetusingthemountingclip.
Beforemountingtheunit,ensurethatyouhave:
•Selectedasuitablelocation,ensuringthereis
nothingbehindthemountingsurfacethatmaybe
damagedwhendrilling.
•Identiedthecableconnectionsandroutethatthe
cableswilltake.
D13212-1
0
0
00
1.Checktheselectedlocationforthemounting
clip,aclearatareaisrequired,withsufcient
spacearoundittoplaceandremovetheFistmic
/Handset.
2.Usingapencil,offerupthemountingcliptothe
desiredlocationandmarkthelocationofthe
screwholesonthemountingsurface.
3.Drillthemountingholesusingasuitablesizedrill
bit.
4.Holdtheclipinplaceandsecureusingthe
screwsprovided.
5.HooktheFistmic/Handsetovertheclipand
gentlypushdownuntilitclicksintoposition.
Note:TheFistmiccanonlybehookedand
unhookedfromthemountingclipwhenheld
vertical.
D13213-1
0
00
Note:Drillbit,tapsizeandtighteningtorqueis
dependentonthethicknessandtypeofmaterial
theunitistobemountedon.
5.5Ray60/Ray70Raymichandset
cradlemounting
Beforemountingtheunit,ensurethatyouhave:
•Selectedasuitablelocation,ensuringthereis
nothingbehindthemountingsurfacethatmaybe
damagedwhendrilling.
•Identiedthecableconnectionsandroutethatthe
cableswilltake.
0
0
0
0
D13302-1
1.Checktheselectedlocationforthemountingclip,
aclearatareaisrequired,withsufcientspace
aroundittoplaceandremovetheHandset.
2.Usingapencil,offerupthecradletothedesired
locationandmarkthelocationofthescrewholes
onthemountingsurface.
3.Drillthemountingholesusingasuitablesizedrill
bit.
4.Holdthecradleinplaceandsecureusingthe
screwsprovided.
5.PlacetheHandsetintothecradleuntilitclicks
intoposition.
D13303-1
0
0
0
0
Locationandmounting
41