Raymarine RAY70 - GPS;GNSS Setup

6.18GPS/GNSSsetup
IfyourradioincludesaninternalGPS/GNSSreceiver
orifyourradioisconnectedtoaGPS/GNSSreceiver
overNMEA0183orSeaTalk
ng®
,theradiocan
displayrelevantGPSinformation.
Thefollowinginformationcanbedisplayed:
•latitude
•longitude
•UTCtime
•COGandSOG
WhenGPS/GNSSdataisavailablethesatelliteicon
isdisplayedonscreen.
IfnoGPS/GNSSdataisavailablethenthelatitude,
longitudeandtimecanbeenteredmanuallysothat
itcanbeincludedinDSCdistresstransmissions.
Positiondatareceivedfromothervesselscanbe
displayedonaconnectedRaymarine
®
multifunction
display.
EnablinganddisablingtheinternalGPS-
Ray70
FromtheGPSset-upmenu:Menu>Set-up>GPS
set-up
1.SelectInternalGPS.
SelectingInternalGPSwillswitchtheinternal
GPS/GNSSreceiverOnandOff.
NoGPSpositiondata
IfnoGPSdataisavailableorGPSdatabecomes
unavailable;after10minutesanaudiblewarningis
sounded,theGPSiconashesandtheNoposition
datamessageisdisplayed.
OncethewarninghasbeenacknowledgedtheGPS
iconwillcontinuetoash.TheNopositiondata
warningisrepeatedevery4hoursifpositiondatais
stillunavailable,hasnotbeenenteredmanuallyor
hasbeenenteredmanuallybutover23.5hoursago.
Ifpositiondatahasbeenenteredmanuallythe
displayalternatesbetweendisplayingthemanual
positionandtimeandtheManualPosition
message.ifthemanuallyenteredpositionhasnot
beenupdatedinthelast4hourstheGPSicon
ashesandanaudiblewarningissounded.This
warningwillberepeatedevery4hoursuntilposition
ismanuallyupdatedorGPSpositiondatabecomes
available.
Wherenopositiondataisavailableorhasnotbeen
manuallyupdatedfor23.5hoursthenpositiondata
willchangeto‘9’sandtimewillchangeto‘8’s.
Enteringpositionmanually
IfGPSpositiondataisnotavailableitcanbeentered
manually.
FromtheGPSset-upmenu:Menu>Set-up>GPS
set-up.
1.SelectSetmanualposition.
TheManualpositionscreenrequiresyoutoinput
latitude,longitudeandUTCtime.
2.UsetheRotaryknobtocyclethroughthe
availablenumbersandpressOKtoconrmeach
numberandmovetothenextdigit.
3.Whentherelevantinformationhasbeenentered
selectOKtoconrmthedetails.
SelectingGPSinformationtodisplay
YoucanchangetheGPSdatathatisdisplayedon
theHomescreen.
FromtheGPSset-upmenu:Menu>Set-up>GPS
set-up.
1.SelectHomescreendisplay.
2.Selecttherequiredoption:
•Location&time
•Location&COG/SOG
TheHomescreendisplayoptionisalsoavailable
fromtheDisplayset-upmenu
Settingtimeformatandoffset
YoucanchangetheFormatandOffsetthatisapplied
tothetimedisplayedonscreen.
FromtheUnitsmenu:Menu>Set-up>Units.
1.SelectTimeformat.
2.Selectthedesiredformat:
•12hour
•24Hour(default)
3.SelectTimeoffset.
4.Adjusttheoffsettothedesiredvalueusingthe
RotaryknobortheChannelUpandChannel
Downbuttons.
5.SelectOKtoconrmtheselection.
Gettingstarted
55