Raymarine RAY70 - Private Channels; Automatic Transmitter Identification System (ATIS) and Marcom-C Mode

8.5Privatechannels
TheradiomaybeabletoreceiveadditionalPrivate
channelsdependingonthecountryitisusedinand
whethertheappropriatelicensesareheld.
ThefollowingPrivatechannelsetscanbeselected:
•None
•Belgium
•Denmark(pleasure)
•Denmark(shing)
•Finland(pleasure)
•Finland(shing)
•Holland(Netherlands)
•Norway(pleasure)
•Norway(shing)
•Sweden(pleasure)
•Sweden(shing)
•UK
Selectingaprivatechannelset
Youcanselectthesetofprivatechannelsyouwant
touse.
FromtheChannelset-upmenu:Menu>Set-up
>Channelset-up.
1.SelectPrivatechannels.
Thelistofprivatechannelsetsisdisplayed:
2.Selecttherequiredprivatechannelset.
8.6AutomaticTransmitter
IdenticationSystem(ATIS)and
Marcom-Cmode
ATISisaEuropeansystemusedonsomeinland
waterways.
VHFradiosoperatinginanATISregionmustbe
programmedwithauniqueATISnumber;thiscanbe
obtainedfromtherelevantlicensingauthority.The
ATISnumberisattachedasadigitalsignalatthe
endofeachtransmissionandidentiesyoutothe
relevantauthoritieswhomonitorthesystem.
WhenoperatinginATISmode,someoftheproducts
featuresarenotavailable:
•UseofDSCfunctionsisnotpermittedinATIS
regions.
•WatchmodesarenotpermittedinATISregions.
•ChannelscanningisnotpermittedinATISregions.
•ATISregulationsrestrictthetransmitpowerto1
wattforthefollowingchannels:6,8,10,11,12,
13,14,71,72,74and77.
YoucanenableordisableATISusingthemenus
(exceptonMarcom-Cconguredunits).
Marcom-Cmode
Marcom-Cmodeisarestrictedradioconguration
forVHFoperatorswithaMarcom-Clicense.This
isapplicabletoradiosoperatedexclusivelyin
EuropeaninlandwaterwaysusingtheATISsystem.
AMarcom-CVHFradiohastheATISpermanently
enabled.YouwillnotbeabletodisableATIS
operation.Marcom-Coperationissetbythedealer
atpointofsale.Ifyouwishtoenableordisable
Marcom-Cmode,youmustcontactyourRaymarine
dealer.
ForfurtherinformationpleasecontactRaymarine
technicalsupport.
EnablinganddisablingATISmode
ATISisaEuropeansystemusedonsomeinland
waterways.ATISmustbeenabledandaunique
ATISIDenteredinordertouseATISmode.
FromtheMainmenu.
1.SelectSet-up.
2.SelectATISset-up.
3.SelectATIS.
4.SelectOntoenableATISmodeorOfftodisable
ATISmode.
WithATISmodeenabledtheradio’sregionwill
bexedtotheINT(international)frequencyband
andthefollowingfunctionsaredisabled:
•DSCfunctions
•WatchMode
•ScanMode
•High/lowpowerisrestrictedoncertain
channels
OnceATIShasbeenenabledanATISIDmustbe
entered.
70
Ray50/Ray60/Ray70