5-8 Raynav 300 GPS Plotter
Figure 5-4: Raynav 300 GPS Plotter Dimensions
Trunnion (yoke) Mounting
The display unit can be conveniently mounted on a dash area, chart table,
bulkhead or deckhead.
Note: The gasket should be fitted to the rear of the unit to ensure EMC
compliance.
➤ To trunnion mount the display unit, proceed as follows:
1. Loosen the trunnion knobs and remove the trunnion from the display
unit.
2. Mark the locations of the trunnion screw holes on the mounting sur-
face.
3. Use the screws supplied to fix the trunnion at the marked locations.
To Next Page
Loading...