Chapter 2: Using the RayPilot 650 13
2 Using the RayPilot 650
AUTO and STBY
• Press AUTO and STBY together from any other mode to enter
Wind Vane mode
NAV
• Momentary press (while in Auto or Wind Vane Mode) flashes the
display between bearing to waypoint and direction the vessel will
turn.
• Second press within 10 seconds of the first press will engage
Navigation (Track) mode and turn the pilot onto the bearing to the
first waypoint.
• Press and hold for 2 seconds to automatically select the next
waypoint in a route (Raychart or SeaTalk compatible
plotter/GPS). This will also advance the Target waypoint on the
Raychart if equipped.
D5661-1
D859-1
81013_4.book Page 13 Wednesday, July 25, 2001 11:04 AM
To Next Page
Loading...
