Chapter 2: Using the RayPilot 650 15
2 Using the RayPilot 650
RESP and NAV
• Momentary press of RESP and NAV together will switch the
display between cross track error and rudder angle (displayed
value and scale).
RESUME (PWR STR)
• From Standby mode:
• press to display the last automatic heading – the heading will
alternate with the direction you have to steer
• press again within 10 seconds to lock onto the last automatic
heading
• From Wind Vane mode:
• press to display the last locked wind angle and direction
• press again within 10 seconds to return
• Press
RESUME for 2 seconds to engage Power Steer mode from
any mode (except calibration, compass correction and joystick
manual).
D1008-1D862-1
81013_4.book Page 15 Wednesday, July 25, 2001 11:04 AM
To Next Page
Loading...
