Chapter 1: Overview 1-5
Heading and
Position Data
The following are available:
Half -Screen Window Options
• Radar Display, Chart Display: If data is available as a function of the
combined display unit it can be displayed full screen or in a half screen
window.
• CDI: This gives the Course Deviation Indicator graphical display, with
data relating to the target waypoint (if available on SeaTalk).
• BDI: This gives the Bearing and Distance Indicator graphical display, with
data relating to the target waypoint (if available on SeaTalk).
• Nav Data: This shows nine data boxes, providing navigational data (from
SeaTalk or NMEA) in the units specified in your set up. Note that up to 6 of
these data boxes are also available as a user-selectable group (see
Section 7.3).
Heading and Position Data
Full functionality of the radar/chartplotter is achieved when it is part of an
integrated system with other equipmentconnected via SeaTalk or
NMEA 0183. Data from this equipment including position and heading is
shown on the display and is used in calculations.
Details on connecting other equipment are given in Chapter 8.
Table 1-1: Operating Modes and Window Options
Display Full-screen mode Half-screen Window Options
SL72 PLUS Radar CDI, BDI or Nav Data
SL72RC PLUS
Radar Mode CDI, BDI, Chart or Nav Data
Chart Mode CDI, BDI, Radar or Nav Data
Data Log Mode Windows not available
To Next Page
Loading...
