Need help?Do you have a question about the Raymarine SmartPilot X-5 and is the answer not in the manual?
General| Type | Autopilot |
|---|---|
| Power Supply | 12V DC |
| Heading Sensor | Fluxgate compass |
| Data Connections | NMEA 0183 |
| Max Boat Weight | 2, 500 kg (5, 500 lbs) |
| Maximum Boat Length | 15 m |
| Max Boat Displacement | 2, 500 kg (5, 500 lbs) |
| Power Consumption (standby) | 50mA |
| Operating Temperature | -20 to +55 °C |
Introduces the SPX-5 Tiller system, its purpose, and maximum displacement values.
Details how to switch the control unit on/off and its basic functions.
Guides on how to use the SPX-5 Tiller system to steer the boat to a heading.
Step-by-step guide on how to use the system to steer the boat to a heading.
Procedure to disengage the autopilot and return to manual steering control.
How to change the locked heading using course change keys in Auto mode.
Explains how to adjust the system's performance by changing the response level.
Lists alarms supported by the SPX-5 Tiller system and how to respond.
Explains how to access user calibration mode for system setup.
Explains how the autopilot follows a pre-defined route or track.
Details how to enter Track mode and leave it, including waypoint handling.
How to avoid obstacles in Track mode and re-initiate the mode.
How the system maintains a course relative to wind angle.
Step-by-step guide to enter Wind Vane mode from Standby or Auto.
How to exit Wind Vane mode and return to Auto or Standby.
How to avoid obstacles while in Wind Vane mode.
How to perform an automatic tack maneuver in Wind Vane mode.
Provides tables to help identify and solve problems with the SPX-5 Tiller system.
Lists alarm messages, their causes, and remedies for system faults.
Details important maintenance, safety precautions, and available spare parts.
To Next Page