10 SmartPilot X-5 Tiller & GP Tiller Operating Guide
If the required information is not available for any data page, dashes are displayed.
Most data pages show repeated data so are for information only; you cannot adjust
the values on them. An exception to this is the
RESPONSE
page, where you can adjust
the values using the
-1 and +1 buttons.
Waypoint names
If waypoints have been given names, the Pilot Controller will display them on the
Cross Track Error (
XTE
), Bearing To Waypoint (
BTW
) and Distance To Waypoint
(
DTW
) data pages:
• Waypoint names of five characters or less are displayed together with the page
name (as shown by screen A below).
• Waypoint names of more than five characters alternate with the page name (as
shown by screen B below).
• If a waypoint name has more than nine characters, the display only shows the first
nine characters.
D10533-1
Autopilot mode
Data page 1
Data page 3
Data page 4
Data page 2
Default data pages
Press for 1 sec to
return to previous
data page
D10535-1
A
B
TRUE TRUE
TRUE
To Next Page
Loading...
