Autohelm
AutohelmAutohelm
Autohelm
SeaTalk Service Manual
4
3. Operating/Calibration instructions
3.1 Operation
Auto
Automatic Heading
Push to engage automatic
steering and maintain
current heading.
OR
Previous Automatic Heading
Push and hold down for 1
second to return to
previous automatic
heading. (Display returns to
Auto after 10 seconds).
Course Changes (—1, +1, —10, +10)
New Automatic Heading
Push to alter course to port
(—) and starboard (+) in
increments of 1 and 10
degrees.
Standby
Current Heading
Push to disengage the
autopilot for manual
steering. (The previous
automatic heading is
memorised).
Track (see operating hints)
Automatic Heading
Push to select track control
from Auto.
Push again to return to
automatic steering.
OR
Push and hold down for 1
second to select previous
track control heading from
Auto or Track.
(Display returns to Track after 10 seconds).
To Next Page
Loading...
