Raymarine ST7000 - Display Key Sequence; Watch Alarm

Autohelm
AutohelmAutohelm
Autohelm
SeaTalk Service Manual 6
Display Key Sequence Watch Alarm (not available in Standby)
• Cross Track Error*
• To select Watch alarm push Display
repeatedly until Watch appears.
◄ or ► indicates direction to steer
• Bearing to Waypoint*
• Distance to Waypoint*
The 4 minute timer is now running:
—After 3 minutes ‘Watch’ flashes on all
control units.
—After 4 minutes the alarm sounds on all
control units.
• Push Auto at any time to reset the timer
to 4 minutes and silence the alarm.
• To cancel the Watch alarm at any time
push Display.
• Watch Alarm (not available in Standby)
*Only displayed when waypoint information
is transmitted to the control unit by a Radio
Navigation System.