Need help?Do you have a question about the Raymarine ST8002 and is the answer not in the manual?
General| Compatibility | Raymarine autopilot systems |
|---|---|
| Display Type | LCD |
| Keypad | Yes |
| Mounting | Bracket or flush mount |
| Data Interface | NMEA 0183 |
| Waterproof Rating | IPX6 |
| Power Supply | 12V DC |
| Operating Voltage | 12V DC |
| Weight | 0.4 kg (0.88 lbs) |
Overview of documentation, warranty, safety warnings, product disposal, and EMC.
Explains SmartPilot modes, control unit operation, and keypad functions.
How to automatically steer, change course, dodge obstacles, and use Power Steer.
Adjusting system response level and display lighting/contrast.
Accessing and adjusting user-specific system calibration settings.
Using Track mode with chartplotters, route following, and cross-track error.
Using Wind Vane mode for sailboats and viewing boat data.
Troubleshooting common faults, interpreting alarm messages, and their solutions.
Routine checks, cleaning, EMC advice, and product support information.
Technical details for the ST8002 control unit, including dimensions and connections.
Comparison of functions between S1G/S2G/S3G and Non-G SmartPilot systems.
Definitions of technical terms used in the manual.
To Next Page