Chapter 2: Technical Characteristics
DOC-S0508-1R14-IMEI02 • Technical Manual • Issue 7 | Page
o Test that determines the quantity of energy loss through the door. The result is a U
value in W/m²K
Performance
o Test number cycles during which the durability of the water and wind permeability and
thermal resistance are tested.
2.2.4. RC 300 EN Standards
EN Standards Chart 2-2
Criteria Standard Test method Result
Water Permeability EN 12425 EN 12489 Class 1
Wind Load EN 12424 EN 12444 Class 3*
Wind Permeability EN 12426 EN 12427 Class 2
Safety during opening EN 12453 EN 12445 Pass
Mechanical Resistance EN 12604 EN 12605 Pass
Unintended Movements EN 12604 EN 12605 Pass
Thermal Resistance EN 12428 EN 12428 6.02 W/m²K
Performance (Cycles) EN 12604 EN 12605 1,000,000
* The indicated class for Wind Resistance applies for maximum
dimensions. For doors up to W 13’-0” x H 18’-0” = Class 4
2.2.5. RC 300HD EN Standards
EN Standards Chart 2-3
Criteria Standard Test method Result
Water Permeability EN 12425 EN 12489 Class 3
Wind Load EN 12424 EN 12444 Class 4*
Wind Permeability EN 12426 EN 12427 Class 1
Safety during opening EN 12453 EN 12445 Pass
Mechanical Resistance EN 12604 EN 12605 Pass
Unintended Movements EN 12604 EN 12605 Pass
Thermal Resistance EN 12428 EN 12428 6.02 W/m²K
Performance (Cycles) EN 12604 EN 12605 1,000,000
* The indicated class for Wind Resistance applies for maximum
dimensions. For doors up to W 16’-0” x H 18’-0” = Class 5
To Next Page
Loading...
Need help?
General
