Chapter 1: Before You Begin
DOC-S0508-1R14-IMEI02 • Technical Manual • Issue 3 | Page
1.2. Installation Tools
You need the following tools to complete the installation of your RAYNOR door successfully.
Water Level Threaded Rod
(2) Ladders Universal Pliers
Wire Stripper Allen Wrenches (Metric/US)
(3) Clamps Fork Lift
Screwdrivers Hammer
Grinder Metric Wrenches
Tape Measure
Utility Knife
Circuit Tester V.O.M.
Punch
Reciprocating Saw
Hammer Drill