DOC-S0508-1R14-IMEI02 • Technical Manual • Issue 1 | Page
Chapter 1:
Before You Begin
1.1. Safety
1.1.1. Hazard Standards
Throughout this manual, there are labels that indicate situations during the installation process
that pose risks to installers and/or equipment.
The mechanical and electrical components of the door may have posted warning and caution
information as well. These typically include the following symbols indicating the type of risk and
precaution to be taken.
The Warning sign indicates a danger to installation technicians who may be
exposed to severe physical harm or death from electrical components. The
symbol includes specific information regarding the risk such as “High
Voltage” or “Keep Hands Clear.”
The Caution sign indicates installation technicians to observe safe operating
procedures. Failure to comply with the procedure may result in injury or
damaged equipment. The sign includes procedural text such as “Lockout for
Safety” or “Lookout for Forklifts.”
Note indicates a related comment or instruction in the manual.
1.1.2. Installation Precautions
Only certified RAYNOR door installers may install RAYNOR doors. Always use proper tools,
procedures and techniques when installing your RAYNOR door. Installation of the RAYNOR door
requires the assistance of qualified electricians and forklift operators. Installation contractors
should ensure that those participating in the installation process have received the appropriate
training and certification required to complete the installation.
Installation performed by untrained technicians may result in injury and/or damage to equipment.
Installation technicians may be exposed to injury from electrical components.
Damage to equipment is possible.
Failure to follow the instructions found in this manual may result in an
inoperable door and void its warranty. Installation by unauthorized persons
may also void your warranty.
1.1.3. Operation Precautions
The following precautions should be taken when operating RAYNOR doors.
Read this manual prior to operating RAYNOR doors.
Keep the control box closed while operating the door.
To Next Page
Loading...
Need help?
General
